We have prepared detailed instructions By ZTE Blade V7 Lite hard reset. Read on to find out all the subtleties and details of this operation.
As you know, hard reset ( hard reset) – this is a factory reset. This means that if you do a hard reset on the ZTE Blade V7 Lite, then the smartphone will be restored to its factory state, from a software perspective of course. It cannot remove any physical damage or scratches on the screen, but it’s easy to remove the pattern, remove the virus, or fix the error!
But you must remember that resetting ZTE Blade V7 Lite deletes all personal data from the mobile device storage. You should save all your important files like messages, contacts, photos, etc. on another device or cloud.
Let's get started!
ZTE Blade V7 Lite hard reset
That's it! After rebooting, the ZTE Blade V7 Lite smartphone will work like new.
ZTE Blade V7 Lite factory reset
Also remember that you can always perform a factory reset through the settings menu. To do this, go to the menu " Settings" - " Backup and reset" - "Reset settings" This method is no different from the first, except that you use the settings menu rather than Android Recovery mode.
We are so accustomed to using smartphones and tablets that when they freeze, we feel uneasy and life passes us by. In this article we will tell you why the ZTE Blade V7 Lite does not turn on, turns off or freezes.
The article contains a list of recommendations, the implementation of which will help you return mobile device back to your old life|We have prepared a small list of recommendations that will help restore the functionality of your Android device).
ZTE Blade V7 Lite does not turn on, turns off or freezes. There are solutions.
There can be many reasons:
- Battery discharged below permissible level– regularly discharge the battery to almost 0 and charge it completely, do not use the device at temperatures below -10, this will make it last longer
- Connector charger damaged - try charging the battery with another charger; if charging was successful, it means the connector of the first charger is damaged;
- Software glitch (rare for Unix systems, which include Android, but the failure could have been caused by some application) - do a full reset Hard Reset/Wipe Data;
- The phone was floating in water, place it in 100% alcohol for a minute, then take it out and dry it with a hairdryer. Alcohol evaporates instantly, unlike water;
- Abuse, being driven over by car, being thrown down stairs, thrown against walls and floors, playing football and handball with a smartphone, and so on - buy new phone or try taking it to a service center.
Why your phone may not turn on or freeze. Video.
Why does ZTE Blade V7 Lite flicker and won't turn on?
If your phone is blinking and does not turn on, the power button may be faulty, try taking the device to a service center.
What to do if ZTE Blade V7 lite does not turn on? There may be several possible faults and solutions to this problem:
- Doesn't turn on due to freezing operating system. You must reboot.
- The battery has failed. In this case, you need to replace the battery.
- The charging connector may be damaged. It's worth replacing it.
- The power controller is damaged due to pressure changes or shocks. It also needs to be changed.
- The board or wiring may be faulty. This occurs from moisture, shock and mechanical damage.
In the last two cases, your phone will require professional diagnostics and qualified service from our authorized Telemama service center. In the first options, it is possible to replace the necessary elements yourself, or with the help of our experienced craftsmen. All required parts are always available in our center and at a very affordable cost.
Price:
Our advantages
If the ZTE Blade V7 lite goes out and stops turning on, in some cases you can do the manual repairs yourself. But it would be better to entrust your gadget to our professionals. All technicians undergo special training in repairing ZTE Blade V7 lite and are well versed in the problems associated with this product. To carry out repair procedures, only original spare parts are used, which are supplied to our service center directly from production.
- The many years of experience of our engineers allows us to quickly solve any difficulties and restore all failed gadgets;
- Modern diagnostics make it possible to identify a true breakdown;
- Due to close cooperation with original component manufacturers, we have a wide range of parts;
- Availability of the necessary spare parts provides significant time savings;
- Thanks to the authenticity and high quality of the parts, we are confident in our work and provide each client with a guarantee for all types of repair work.
Under any circumstances, our specialists will be able to determine why your smartphone does not turn on and will promptly fix the problem.
Telemama Center has been providing services for mobile technology and sale of certified, original components for it. The service center has a lot of positive reviews for its high-quality gadget restoration services. This is confirmation that our work is truly professional, and the spare parts are durable and reliable. Contact our service center and receive excellent service and a guarantee for all repair work.
How to update the software?
We provide you different ways software updates, namely: updating using a memory card or updating over the air.
To update over the air, you need to connect to a Wi-Fi wireless network or GSM Internet connection and check for updates in the settings.
What should I do if the operating time of the device does not coincide with the operating time declared by the manufacturer?
Smartphone is complicated electronic device, which includes the functions of a pocket computer and cell phone and consumes a large amount of energy to operate these functions. The main amount of energy is spent on the operation of the display module and the GSM transmitting and receiving path. The display brightness is automatically set to maximum in very bright environments (sunny day) or set by the user to manual mode. Maximum brightness consumes maximum energy. When GSM is operating and with stable and stable reception “at maximum”, the device consumes a minimum amount of energy to maintain communication. In case of unstable and weak signal network, the device requires more power to maintain communication. In the case of “Network Search” in an area where there is no network, the device consumes the maximum amount of energy, which is spent on searching for nearby base stations. To reduce your phone's energy consumption you need to:
1. Disable GPS if not required.
2. Disable mobile internet if it's not needed.
3. Disable or delete unnecessary unused applications, because they are in an active state and consume the internal resources of the device.
What should you do if your phone freezes, won’t turn on, or reboots?
The cause of rebooting or freezing in most cases is third-party software or programs.
1. Initially, we recommend that you restore the default factory settings (after saving the information you need). If the phone turns on, select the "factory reset" option from the device menu. If the device does not turn on, turn on the device in "Recovery mode" and select "wipe data/factory reset". The method for entering “Recovery mode” is described below in the paragraph “How to enter Recovery mode?”.
2. If resetting to factory settings does not help, update the software. Methods for updating the software are described in the paragraph "How to update the software?".
3. If the software update does not help, contact your nearest Authorized Service Center ZTE.
How to backup data, notebook or "Back up"?
There are 3 ways to do a “Back Up”:
1. In the phone settings, in the "Backup and reset" submenu, check the box for recovery.
2. You can transfer the necessary information to your computer using USB cable.
3. You can make a “Back Up” using a third-party program.
What should I do if I don’t remember the password or pattern to unlock the screen?
If you have forgotten the pattern or digital password to unlock the screen, you need to perform a reset to factory settings: 1. Turn on the device in “Recovery mode” and select “wipe data/factory reset”. 2. If the procedure is not completed, you must contact the ZTE Authorized Service Center.
How to use wireless networks (Wi-Fi, BT)?
1. In the device settings, turn on Wi-Fi. Click on the Wi-Fi icon and you will be taken to the Wi-Fi network management screen.
2. The device will automatically start searching for active Wi-Fi networks in the access zone from 5 to 50 meters to the access point (depending on the power of the access point).
3. Select the network you need and click on it. If wireless network is protected by a password, please enter it.
4. After connecting to the desired network The Wi-Fi icon will appear on the main screen of the device.
How to enable Internet distribution on your phone (USB modem or WiFi router)?
There are two ways to enable Internet sharing on your phone. The first way is to enable distribution as a USB modem, the other is to enable distribution as a WiFi router. Make sure that your device has access to the Internet in order to distribute it:
1. USB modem - this method is used to distribute the Internet to a computer. Connect your phone to your computer using a USB cable and allow data access. "Settings->Wireless networks->More" Modem mode - check the USB modem box." Then the phone will start distributing the Internet to the computer. To stop the distribution, uncheck the USB modem or simply disconnect the cable connection.
2. WiFi router - make sure you have a stable Internet connection via mobile network or USB. "Settings->Wireless networks->More" Modem mode - check the "WiFI access point" box. For protection wireless connection tap the hotspot icon then tap "Hotspot" WiFi access". IN this menu you can set a name and password for your wireless WiFi connection. Your phone will start working as a WiFi router. To stop distribution, uncheck "WiFi router"
How can I quickly see the charging status?
During charging, press the power button. The battery charge status will be shown on the main screen of the phone.
Why is the amount of free memory on the device less than stated by the manufacturer?
Unlike the processor, which has its own built-in memory, other devices, such as a video processor, audio processor and other devices included in the elemental base of the device’s central board, consume user memory resources. A certain amount of memory is reserved in advance for internal needs, but in case of overflow, user memory is used.
What types of device locking can be used?
There are 3 types of screen lock. Select one of the lock types in Settings -> Security -> Screen lock.
1. Blocking graphic key
2.PIN code lock 3.Password lock
What is the operating temperature of ZTE phones?
The operating temperature ranges from (-10C) to (+50C).
What does ROOT mean?
ROOT is "administrator rights". ROOT makes it possible to change system files, change the system, install test programs and perform other actions. ROOT rights are hidden from users, but can be activated if necessary.
Be careful, careless handling ROOT rights may harm your operating system.
How to enter Recovery mode?
In the off state, simultaneously hold down the volume button (increase +) and the power button.
What should I do if the battery is not charging 100%?
The device's battery is designed in such a way that it dissipates part of the received charge and can subsequently be recharged. This feature is designed to protect the battery and increase its performance. If the battery does not charge more than 80%, contact a ZTE Authorized Service Center.
How can I add Google account into the device?
1. When you turn on your smartphone for the first time, you will be prompted to register a new Google account or use an existing one. But this is not a mandatory procedure.
2. To add an account at any time, you can register a new one or use an existing account: Settings->Accounts and “add account”.
How to enable USB debugging? How to get access to the "For Developers" menu?
Enter "Settings->About phone->Tap on "Build number" several times. Then you will have access to the "For Developers" submenu. In this submenu, "USB debugging" and other functions for developers are available
How to connect your phone to PC?
To install the driver (automatically), do the following:
1. Connect your phone to your computer.
2. When connected, select " Virtual disk" or "Virtual CD" depending on the model.
3. The computer should detect an additional disk, run “Autorun.exe” on it and install the driver
4. If the drivers are not installed, go to "Settings->For Developers" and enable the "Disk driver". (click on "Build version" 10 times
5. When you turn on (USB Debugging), the driver will also be automatically installed.
What do the letters E, G, H mean?
When the phone's data transmission is active, the following symbols appear on the status panel (indicating signal reception, battery capacity, etc.):
- E means EDGE protocol is active
- G means active operation of the GPRS protocol
- H means active operation of the HSDPA protocol, which is part of WCDMA
After using a ZTE phone for some time, I encountered some problems, my smartphone did not turn on and, I solved these problems and will tell you about it in the article. ZTE is one of the most famous phone and telecommunication equipment companies in China. However, on the international market, smartphones from this manufacturer have received recognition from a huge number of users. But, despite such popularity and the fact that the quality of components for mobile devices in the Celestial Empire is trying to improve every year, the problem of shoddy assembly remains relevant.
This is what a ZTE smartphone looks like when disassembled. Here the power connector is being repaired, due to problems with which the smartphone refuses to charge and, accordingly, turn on.As a result, about 20% of users who purchased this device complain about bad job battery and problems with charging the smartphone. Others write about ZTE software bugs. Such failures do not go unnoticed for this device and, ultimately, turn it into a so-called “brick” - that is, into a smartphone that refuses to work at all. Therefore, the article will discuss the reasons why a ZTE phone does not turn on, and will also discuss the main ways to solve this problem.
What are the reasons for a ZTE phone to fail?
All problems, in general, with any computer (electronic computer) can be divided into two categories.
- Hardware - failure of certain components of the device;
- Software - malfunctions software device
This also applies to ZTE. In more detail, the main hardware reasons why this model smartphone stops working, connected:
- With the failure of the power connector or power controller. This problem is present in many ZTE smartphones, but it is especially pronounced in the budget models of this phone;
- In addition, the devices of this company have another unpleasant feature - a high probability of overheating;
- Falling or falling into water can also result in a fatal malfunction of the smartphone.
Software errors include:
- Critical system failure when updating the firmware version of a smartphone;
- Viral attack, the result of which is damage system files, responsible for loading and operating the phone.
Therefore, below will be listed the main ways to solve the problem of inclusion ZTE phone.
Hard-reset is the only software-based way to get your phone back into working order today if it refuses to turn on at all. We'll talk about this method below. How to fix ZTE phone power on problem
So there is the following effective way independently solving this issue by turning on the ZTE smartphone. It is based on the so-called “Hard Reset”, that is complete removal all user data on the smartphone, as well as resetting all settings on it to factory settings. This procedure helps fix a huge number of software errors, so it’s worth trying to use this method. To implement it on ZTE smartphone necessary:
- Remove the battery for a few seconds, then insert it back;
This is what one of the ZTE models looks like when disassembled. Here you can see how you can remove the battery from a ZTE phone. - Press and hold the volume up and power keys at the same time;
- As soon as you see the data recovery window and feel the vibration of the device, release both keys;
- To navigate through menu items, use the volume buttons, and to confirm the action, use the power key;
- Now, in this window we need to find the “Wipe Data/Factory Reset” tab and activate it;
This is the smartphone user data control panel. To clear all data and reset the device settings, click on “Wipe Data/Factory Reset” (you need to click on the power button to confirm the choice) - In the next window we confirm the deletion of user data;
Confirmation window for clearing user data. Here we must click on “Yes- delete all user data” - The procedure begins full reset phone, after which the “Hard Reset” menu opens again - in it we activate the “Reboot system now” item.
The final “Hard Reset” window, which is similar to the start one. After completing the procedure of resetting the smartphone to factory settings and deleting all data, select “Reboot system now” to reboot the device. - As a result, the smartphone reboots, after which the device should work.
Before this procedure, do not forget to do backups files contained on the flash card and transfer them to another device. Hard Reset involves deleting absolutely everything that was contained in the phone, including the list of saved phone contacts, call history, SMS and more.
Conclusion
The method described above is the only one today if the problem of turning on the ZTE phone arose as a result of a fatal software error. It is better to entrust the correction of hardware errors to a specialist. However, if you want to try to fix this problem, then these guides on various breakdowns that lead to a smartphone failure and how to fix them will be useful for you:
