Hardware and software failures of the phone can cause the device to completely stop turning on or start an endless reboot. This also applies to smartphones from Samsung. If hardware problems can only be fixed in the service, then many software problems can be solved independently. In today's article, we will talk about what to do if the Samsung phone does not boot up and displays "Downloading ... Do not turn off target". This inscription indicates that the smartphone has entered Odin Mode, which is used to work with the device through a computer. With it, you can install the firmware, reset the device, and so on.

So, if the problem is not related to the hardware, then you should first try to turn off Samsung using the button combination. Since there are no buttons or menus on the screen, you need to simultaneously hold down the power, home, and volume down buttons. Hold them for a few seconds until the screen goes blank. Then you can turn on the device in the usual way - the power key.

On some models Samsung phones ways are different. For example, on devices without a key below the screen, only the volume and power buttons are used. You can check the instruction or manual on the official website to know the exact method for your phone.

An alternative option is a standard reboot, which is performed by long pressing the power button. If Samsung randomly entered Odin Mode, then hold down the power button until the inscription disappears. After that, the phone will turn off completely, and you can start it up in the usual way. Hold down the power key for a couple of seconds until the logo appears on the screen.

The described methods should be used only if the device is not connected to the computer to perform the procedures. If the firmware is currently being installed, then a forced reboot will lead to failures in the OS!

If the previous methods did not lead to a positive result, you need to reset the device cache. This procedure will help fix the error if it is related to crashes or incorrect firmware updates.

First, turn off the device using one of the previous methods. Then press the volume down and power buttons at the same time. The second option is the Home button and the Power button. Wait for the phone to load the Recovery menu. Management here is carried out by buttons for changing the volume level. Move to the Wipe cache partition item and activate the procedure with the power key.

Now it remains to wait for the end of cleaning. When the procedure is completed, activate Reboot system now. The phone will reboot in standard operating mode.

Return to factory settings

If resetting the cache did not solve the problem, you will have to roll back to the factory settings. This operation will not affect your work with the phone in the future if all important information and files are saved in cloud storage or backup profile. Zeroing Samsung devices performed through the Recovery menu. Start the phone again in this mode, as described in the previous method. Only now you need to select Wipe data / factory reset and activate the process with the power button.

Video instruction

This video guide explains the procedure in as much detail as possible. forced reboot and reset Samsung devices.

Conclusion

If you followed the instructions, but none of the methods helped, you need to contact the repair center for diagnostics. Hanging on the Downloading screen may be caused by a firmware malfunction, internal storage and a number of other reasons.

Sometimes users manage to download such smartphone modes that can be turned on only with a strong desire. Sometimes they ask the following: an inscription appeared on the Downloading… Do not turn off target! screen, what should I do? The main thing is not to worry, nothing terrible happened.

This inscription indicates that the smartphone is in Download or Odin Mode, as it is also called. In this mode, you can reflash your smartphone or, say, install the recovery menu. For firmware, the Samsung Odin utility for a PC or laptop is used.

Interestingly, before downloading the Download mode, the user must press the volume down, Home and Power keys simultaneously on the switched off smartphone. After that, a warning will appear, where pressing the volume down will boot the device in normal mode, increasing the volume will start the Download mode.

Early version of the mode:

Later:

There is nothing to be afraid of: if you are not going to reflash the device or install the same recovery menu, just restart your smartphone. And then the question arises - how to do it? After all, there is no separate menu item for rebooting here, there are no virtual buttons no. So what to do?

The same keybinding works here as when this mode is turned on: volume down + Home + Power.

Press these keys at the same time and wait for the screen to turn off. As soon as it goes out, remove your fingers from the buttons and wait for the device to load.

And remember that in no case should you reboot your smartphone in this way if you are flashing it at the current time - this can turn the device into a brick!

Some of the owners of Samsung phones may encounter a situation where their phone refuses to boot on reboot, and the message “Downloading… Do not turn off target” is displayed on the screen. Pressing various keys does nothing, the phone does not react in any way, and the user has no idea what to do. In this article, I will try to shed light on this problem, tell you why this inscription appears, and also explain how to get rid of Do Not Turn Off Target Samsung on your mobile device.

Translation of the inscription and the reasons for its appearance

The above screen that says "Downloading... Do not turn off target" in "Downloading... Do not turn off target", which translates to "Downloading... Do not turn off the target device" is the downloading mode (downloading mode) that is used to implement firmware (installation of the OS and its elements) mobile devices from Samsung. As a tool for this purpose, a special program called "Odin" is used, designed exclusively for flashing mobile devices from this South Korean brand.

Usually, to enter this mode, you need to hold down the power button and the volume down key, and then, after entering the technical mode, also press the volume up key. So you get into the “downloading mode” (“odin mode”), the inscription I quoted is displayed on the device, and the device itself enters a state of readiness for firmware and connection to a PC.

Since the average user does not know what to do in this situation, the device will remain in the Do not turn off target state until the battery runs out. After the device is turned off and the user charges it again, the device will again work in normal mode.

In addition to the cause of "crazy hands" accidentally running "odin mode" on the device, there are a number of other determinants that can enter your samsung smartphone to the specified mode:

How to Fix Do Not Turn Off Target Error

If your phone accidentally enters Do Not Turn Off Target mode, you don't have to wait hours for the battery to run out. Just hold down the power button for a while (10 to 30 seconds) and your phone will reboot normally.

Also, a good alternative would be to simply remove the battery from your device (if it is removable), some experts recommend also removing the SIM card along with the battery. Wait a few minutes and then put the battery and card back.

Usually, these actions are enough to restore the normal operation of the device. If these techniques were ineffective with the Do Not Turn Off Target mode, then we are dealing with a serious dysfunction of the device, and you need to do the following:

• Try resetting your phone to factory settings. I immediately warn you about the loss of user data on the device after performing this action, but if the usual reboot of the device does not help, then you can try this tool. Hold down the power and volume up keys of the device, wait for the image to appear on the screen, and then release the keys. You will be taken to recovery mode, there you need to select the wipe data / factory reset option and wait for the process to finish;
• If resetting the data to the factory settings did not help, then you should consider flashing your device. Please note that this action should be carried out by a professional, and it is advisable to use official firmware from the developer
• It is also worth contacting the service center with a description of the problem. Perhaps your device is damaged at the physical level, and various software manipulations here will simply be ineffective.

Visually, how to remove the Do Not Turn Off Target inscription can be seen in the video.

In most cases, to fix the Do Not Turn Off Target issue on Samsung, just hold down the power key of the device for a few seconds. If this technique does not work, then we are dealing with a serious software and hardware problem, the solution to which can be either resetting the phone to factory settings or transferring the device to a service center for repair.

In the "Knowledge Base" section, we consider the most common problems that may arise during the operation of Android-based devices. Today we will look at the solution to the problem with the Downloading error. Do Not Turn Off Target - how to remove the inscription. It should be noted that this is mainly the subject of attention of Samsung tablets and phones. However, this kind of difficulty may also apply to other models of mobile devices.

So, first you need to figure out what exactly could cause the device to block, as a result of which such an inscription appears on the screen, and then any possibility of manipulating the device disappears.

The first reason is not a breakdown, it just happens that the system automatically formats partitions or installs some kind of software. In this case, in order not to turn your device into a “brick”, in no case should you interrupt the operation, which is what this message says: “Loading. Do not interrupt the operation."

The second reason - system error, characteristic for certain models of Android mobile devices.

The third reason may be the state of the USB connector, when for some reason (for example, oxidation) a resistance was created in the micro-USB socket, which is typical for a USB-Jig, with which the smartphone is entered into the firmware mode (or Download Mode), as a result which the device can enter this mode without the visible participation of the owner.

Troubleshooting.

To avoid interrupting the normal operation of the system (as we discussed above), before proceeding to active actions, you need to wait from five to thirty minutes (the waiting time depends on the amount of information in your device). If the problem persists, then we suggest using one of the methods, which will be discussed below.

First way. To begin with (if the devil is not as scary as he is painted), you can try elementary actions - turn off the device, remove the battery, after a five-minute wait, insert the battery and start the smartphone again. Did not help? Then let's move on.

Second way. The meaning of our actions will be to switch to recovery (recovery) - recovery mode, in order to then forcibly turn off the Downloading mode. The step by step process will look like this:

We take out the flash drive and the SIM card, turn off the gadget, take out the battery for a few seconds and return it back, press and hold the volume button in the INCREASE direction, while continuing to hold it, press the power button. Hold until the device starts loading, after which, release the power key, and continue to hold the volume rocker

As a result of these manipulations, the device should boot into the factory settings mode, after which:

• Activate the VOLUME UP position.
• Then the item RECOVERY.
• Then wipe data/factory reset.
• Let's wait a bit and select "reboot system now".

We will make the choice with the power button (on / off), and navigate through the items using the volume button.

For some devices, the algorithm of actions may be slightly different:

• Switching off the phone.
• Battery removal and return.
• Simultaneously pressing the power / lock button and "home" (square button at the bottom of the screen)

After which we must directly . Do not forget that our goal is to get into recovery, so you can always clarify how this can be done on your smartphone model. Further:

• We select wipe data / factory reset, confirm by pressing “home” (if it doesn’t work, turn it on / lock it) - “yes”, we confirm, the process of restoring all phone settings to factory settings begins.
• Upon completion, it automatically returns to the main menu of the recovery, select reboot system now, the phone will reboot and turn on without a password.

Third way. This option is used in the case described above (third reason). That is, if all attempts did not help, then you need to diagnose the USB connector and, if necessary, replace it later. Flashing, resetting to factory settings, and other dances with a tambourine will definitely not help. Of course, the replacement will have to be done at the service center, but for those who are friends with their hands, we offer the following video. There are no Russian subtitles, but everything is clear and accessible:

Well, that's all we wanted to talk about this topic. Since there is no single way for all devices, there will certainly be questions, so please contact us, we will try to figure it out in each specific case. Good luck!