Due to viruses, driver mismatches, or software, the OS may crash. If your Windows crashed, don't panic. The situation can be corrected by returning the state of files and programs to the time when the PC was working properly.

Certain errors and problems may occur while running OS Windows 7, 10 or 8. As a result of such failures, a new start of the operating system in operating mode becomes impossible. In this case, it is not at all necessary to do a laborious reinstallation of the OS. It is enough to perform a system restore.

OS recovery using recovery environment

When working, we use the following scheme of actions:

1. Reboot the computer, press the F8 key during boot;
2. Troubleshooting;
3. System recovery, choosing an OS restore point;
4. Click "Further" and again "Further";
5. Push the button "Done", we reboot the system (in the Menu, select the boot with the last good configuration).

There are several ways that you can resort to resuming the OS. Some of them are based on rolling back to saved parameters. Others simply clear the data.

You can "reanimate" the OS in one of the following ways:

• by choosing restore points;
• by using command line;
• through safe mode;
• using the recovery environment;
• using an image / boot disk.

Recovering the operating system using the "reanimation" checkpoints of the system is one of the most affordable, effective and popular options. To apply it, you need to make a series of clicks:

1. Panel "Start";
2. "System Restore";
3. "Further";
4. "Select a restore point";
5. "Done".

Such an operation will fix the problem with the computer, discard the changes and return the system to the operating state that allowed the PC to boot normally. Loss of data, files and documents during such recovery does not occur. All data is saved. The operation is reversible. You can roll back the system to a previous state of the computer and use a different restore point.

Many people wonder how to independently (manually) make a recovery point in order to select it in the future? To do this, in the same menu "Start" - "System Restore" you can create such a point yourself at any convenient and suitable moment for you. It will be saved with the current date, which you can only remember.

From the point of recovery

In computer engineering, there is such a thing as a restore point. These are saved PC parameters. As a rule, saving occurs automatically with each successful OS boot. Most easy way resuming Windows 7 is to use exactly this data.

Press F8 while booting your computer. This command will bring up a menu of options for starting the system. Next, select the Last Known Good Configuration option.

Another method can be used. Go to the properties of the My Computer folder. Find the line System protection, by clicking on which you will open the dialog box of the same name. Click Recovery - Next. We set a key date, specify the disks to be repaired, and confirm the actions. After restarting, the PC should work fine.

No restore points

You can fix problems with the OS even without restore points. To do this, you need to resort to the LiveCD program. It needs to be downloaded and written to a USB flash drive with the .iso extension.
Further, all actions will take place in the BIOS. It is necessary to configure booting from a USB flash drive. To do this, in the Boot section, select USB-HDD in the First boot device line.

Before proceeding directly to the recovery, copy all the necessary files to a removable disk. The LiveCD program provides a special menu for this purpose.

We will fix the system error using an archive copy. Connect the USB flash drive, open the Windows \\ System32 \\ config \\ folder. Files with the names default, sam, security, software, system must be transferred to any other folder. In their place we transfer similar files from the RegBack folder and restart the computer.

The described method will only help if the problem is related to the registry.

Command line

You can resort to "reanimating" Windows 7 from the command line if the PC begins to freeze or work slowly, however, the system boots. Enter the menu "Start" and use the right mouse button to run Command Prompt as administrator. Issue the rstrui.exe command, which will open the System Restore program. Click on "Further"... In the next window, select the desired rollback point and click again "Further"... Upon completion of the process, the PC should work normally.

You can enter the utility differently. Go to "Start"... To call the command line, press "Run" and register the CMD command. Click on the found CMD.exe file and wait for the launch. Next, enter rstrui.exe in the command line and confirm the action with the Enter key on the keyboard.

It is not always possible to play it safe and create OS restore points in advance. There may be problems that block the option of such a "resuscitation" of the PC. Then you can use another, no less effective and easy option - restore the Windows system using the system itself.

We rely on the diagram:

1. Icon "My computer" - right mouse button "Properties";
2. "System protection";
3. In the new window, click "System protection", restore button;
4. "Further";
5. We select a restore point in accordance with the date;
6. We indicate the system disks to be restored;
7. We confirm the operations and reboot the system.

Restoring Windows 7 with Safe Mode

This method is preferred if the usual boot of the system is impossible. Then after pressing the PC power button on system unit hold down the F8 key to call Launch menu... One of the "Menu" options is « Safe mode» ... Select it and press Enter on your keyboard. As soon as Windows boots up, we carry out the algorithm of actions that we described earlier.

Windows 8 / 8.1 System Restore

If you were able to start the OS, you can resume Windows 8 via "Parameters"... Move your cursor over the upper right corner and enter them. Click on "Changing computer settings" – ... Section "Recovery" will offer several options:

1. "Normal recovery with preservation of information".
2. "Removing data and reinstalling the OS".
3. "Special Option".

Decide what exactly needs to be done. Then follow the prompts on the menu.

If you choose the latter method, in the window that opens, click on the diagnostic item. You will be offered the following options:

• "Restore";
• "Reset to original state";
• "Extra options"... This item includes the ability to roll back to the desired resume point.

To resume Windows 8.1 press Win + R and call sysdm.cpl. In the system properties window in the tab "Protection" specify the required system drive. Click on "Restore"... By clicking "Further", you will be able to see a list of rollback points. Select the one you want and click Search for Affected Programs... Changes that have been made on the PC since the selected moment will be deleted. End the process by clicking "Done".

In the case of working with Windows 8, problems may occur, incorrect operation of the Internet, etc. To fix this, you can use the classic recovery method via restore points.

Another option is to roll back the system. To do this, open the menu "Start" - "Control Panel" - Windows Update... Choose an item "Removing updates"... You can do the same using the command line.

So, in the list of updates that opens, we delete those of them, from the moment of installation of which (we look by date) problems and problems began. Delete unnecessary files and reboot.

In Windows 8.1, you can perform a factory reset. Important files will not be affected by this operation. The method is effective, but for its implementation you need the OS to boot without problems. We use the algorithm:

1. Right side of the monitor - "Parameters";
2. "Change settings";
3. "Update and recovery" - "Recovery";
4. "Recover without deleting files".

If you cannot log into the system in the usual way, you must use the system disk. We load the installation disk, select "System Restore"... Push the button "Diagnostics", and "Restore".

If you have problems with Windows 10, press Windows + Pause. Go to "System protection" and press "Restore" – "Further"... Select the required indicator and press again "Further"... When done, press "Done"... The computer will automatically restart and the changes will take effect.

One of the advantages of "ten" is the ability to return the settings to the factory settings. This avoids having to install the system first. To reset data go to "Computer settings" – "Update and Security" – "Recovery" – "Reset the computer to its original state"... Click on "To begin".

You can take care of the possibility of rollback in case of failure in advance. You can create resume points yourself, or you can set up their automatic creation at the desired frequency. To do this, in the settings, in the Update and security item, select Backup service. Specify where to save copies, click Add Disk. After selecting a device, the function will be activated.

You can restore the Windows 10 system again through using restore points. In this case, the system will roll back to the moment when it booted without hindrance and worked without failures. This recovery method is described at the beginning of the article.

If the OS does not boot, then a warning table appears on the screen with the key "Additional recovery options"... Click it and select "Diagnostics" - "System Restore"... We make a choice of a Windows restore point, wait for the system rollback and reboot.

If such operations did not help and the computer continues to work incorrectly, you can roll back to the basic settings. Some programs and utilities, personal PC settings will be reset, and personal data will be deleted.

This technique is rarely used if the other options described above do not help. The algorithm of actions is as follows:

1. "Start" - "Parameter selection" - tab "Updates and Security";
2. Paragraph "Recovery" - button "To begin";
3. We choose to delete all files or partially keep them.

It will then take 40-90 minutes to roll back the system.

Resume using the installation disc

One of the radical methods of fixing the error involves using an installation disc. After launching it in BIOS, click System Restore. Under Troubleshooting, specify the desired action. Then follow the prompts of the system to complete the process.

Do you think that time cannot be turned back? Believe it is possible! A wonderful tool Windows 7 System Restore will act as a time machine. How do I restore the system? Every day Windows 7 remembers vital OS parameters and saves them, creating a restore point. When serious failures occur on a computer, its normal operation can be returned from the restore point, that is, transferred to a prosperous past that was saved by the system. It is important to know that when you access a recovery point, your documents are not deleted by the recovery system. However, programs that were installed after the restore point was created will be lost and will need to be downloaded again. You can cancel System Restore and use a different restore point. How to restore the computer system Click on the Start button, select All Programs.

Restore previous computer settings. revert old computer settings

Info

Since one of the conditions for the System Restore program to work is to disable all programs, it is clear that I could not take screenshots during the recovery process. Therefore, I will simply describe the sequence of the process. 1. After clicking the "Next" button, all shortcuts on the desktop will be closed.

2. An inscription appears - "Please wait, Windows files and settings are being restored." 3. The next inscription will be - "Initializing System Restore". 4. Next - "System Restore restores the registry."
5.

Important

The next one is "System Restore removes temporary files." 6. Next - "Recovery Complete" Reboot is automatically enabled. After rebooting and loading Windows, the first box to appear stating that System Restore is complete and user files are not affected.

Computer settings: how to restore -\u003e computer settings: how to restore

Restore points are automatically created on a weekly basis as well as before significant system events such as the installation of programs or device drivers. System Restore - will save your personal data, photos, videos, music, documents. However, programs and drivers installed after the selected restore point can be removed.

Recovery points are stored until the disk space reserved for system recovery is full. As new recovery points are created, old ones will be deleted. The path to this tool is Start → Control Panel → in the "System and Security" section, select the "Find and fix problems" button. This window will open (Click on the picture to enlarge) At the bottom of the left column - the "Restore" button. Click - a new window will open.

Revert old computer settings

Now is the time to write how to do a system restore in Windows 7. and to put it more simply, now I will write about how to roll back the system. If you have any problem with your computer, well, for example, it has become very buggy, or even worse, it does not start at all, then the first thing you need to do is try to roll back the system, thereby we will return the settings and system files from the backup that was created for example two days ago, when the computer was still working normally. This is a good opportunity to quickly fix your computer and get it back to normal working order.
We do system recovery on all versions of Windows, order the wizard by phone. You can return the computer settings to WindowsXP using the "System Restore" item.

How do I restore my computer to an earlier state?

If the operating system failed to restore the system, then the window will be different. This often happens when antivirus software is running. Disable it and try again. If you were able to successfully solve the problem "", then I congratulate you.
But in some cases, the restoration of the system did not lead to an improvement in the situation, but, on the contrary, to its deterioration. The system began to freeze, some programs did not load at all, icons on the desktop disappeared, etc. In such a case, it is best to cancel System Restore.
To do this, we go through the whole algorithm, starting from point 1. When you complete step 3, you will see the following window: Select "Cancel system restore" and then everything according to the algorithm presented above. So, Friends, we examined a rather important question “how to restore the system?”, Learned how to “roll back” the system to restore points and cancel “rollbacks”.

How to restore old settings on a computer

Usually, removing the program or driver will fix the problem. Restoring Windows 7 and 8 In the last article, we looked at how to make a Windows restore point. Now we are going to learn how to restore Windows system from this point.

If you have not read the previous article, then I advise you to do it. Whenever sooner or later we all install some unknown crap on our computer, and at our own peril and risk. Without thinking about the consequences, we stick various programs into our PC in order to test their "wonderful" ability to do something incredible (as we are assured before downloading the program).

Restoring and resetting Windows 8 Before Windows 8 was released, resetting your computer to its original state was not easy and quick. But now, with new features, it can be done in minutes.

How to restore old settings on a computer

In case of serious violations of the OS, this tool is ineffective and you cannot avoid turning to one of the advanced methods of system recovery. In one of the following articles, I will just talk about such a tool - the rescue disk. Hello, dear readers of the blog Business on the Internet! You may need to restore your computer system if you see such failures:

• the operating system runs at the speed of a snail,
• programs hang,
• the menu expands by itself and disappears,
• while Windows is running, it displays numerous error messages,
• from time to time the computer makes strange sounds.

There is something to be upset about! If this happens, you will want to return to the time when the computer worked well.

How to restore old settings on a computer

In the System Protection dialog box, click on the Delete \u003d\u003d Continue \u003d\u003d OK buttons. Close the window and start removing viruses. After you've cured your computer, create a new restore point. Name it accordingly, for example "After disinfection".

Attention

Restoring your computer system is a simple, but very important task to keep Windows 7 running. When you know well the functions of the computer, it is not a secret for you how to restore the system, you do not need to look for a specialist or knowledgeable friends. You can do this task perfectly on your own! Good luck and see you on the pages of the Internet Business blog! I would really appreciate it if you use these buttons! Thank! System Restore restores the system files on your computer to a previous point in time.

Click on the picture to enlarge) In this window there are two buttons for restoring the system. The first one, which is recommended to apply first of all, is "Start System Restore". This is the ability to fix problems that slow down or block your computer. The second button "Advanced recovery methods" - recovers a computer with very severe damage. Using a system image or Windows installation disc.

Before running System Restore - save open files and close all programs. Because, after confirming the restore point, the restore tool will restart the computer. Then click the Start System Restore button. If your computer is configured to enter a password, then after clicking this button, a request for an administrator password will open. Specify the password. The System Restore window will appear.

WindowsXP can be done using the "System Restore" item. In order to do such a thing on your computer, you need to reboot and press the F8 key to wait for the boot menu to appear in which you need to select "Safe mode", then confirm the computer robot in this mode and follow the path "Press Start -Choose programs - click the standard ones - press service - and finally poke on, system recovery. " Integration of the 21st century Many manufacturers of computers, laptops and netbooks install hidden partitions with the installed operating system and factory parameters (settings), programs and drivers to restore Windows in the event of a system crash, persistent blue screens of death, deletion by the user (due to inexperience) of the necessary system files , incorrect shutdown of services, infecting the computer with viruses, rearranging a new OS, etc.

How to restore old settings on a Windows 8 laptop computer

Friends, I promised my regular readers a long time ago to write an article on system recovery. Many of us have already encountered such a situation more than once, when we install a program, make some adjustments to the operating system, accidentally delete service files and do much more, which ultimately leads to incorrect and unstable operation of the OS. Will I tell you today? What needs to be done to return the operating system to a working state.

Friends, do not forget that there are no hopeless situations. The algorithm discussed below will be useful to everyone. There is no one who does not make mistakes and always does everything right. As wise people say: "He does not make mistakes, only the one who does nothing."

But you should also be able to correct mistakes. And for everyone who wants to know, if necessary, and undo the last actions on the computer, I wrote a detailed algorithm.

Good afternoon friends. Most personal computer users like to experiment with their computer, install certain programs, enter various system settings and change them in their own way.

The most dangerous thing is to change the settings in system disk C. After that, the computer may simply not turn on. Also, similar problems may occur if the user turns off certain startup services or startup programs.

In other words, there are many ways to make your computer stop working as you are used to. The main thing is to remember what you have done with the system, so that later you can change what you have done. But, if you forget what you changed in Windows, there remains one real way to get everything back as it was - System Restore.

For example, one of the readers of my Facebook group made it so that he had an incomprehensible announcer in English, which every hour advises him something.

He does not know how to remove this talker, I advised the person to simply restore the Windows system, for example, yesterday, before this setting, because this is the fastest way to fix the problem, otherwise you will have to spend time thinking about what exactly he did.

Now we will consider the recovery of the Windows 7 system, but, I assure you, in Windows 8.1 and 10, recovery occurs in a similar way, and it makes no sense to talk about all three systems at once. In Windows XP it is the same.

Windows 7 system recovery via start

So, for this, we simply enter two words "System Restore" in the search bar through the start.

Then, click on this command and enter recovery mode. As you can see, I only have one restore point and I will have to be content with it. It is better if there are several of them. We'll look at how to make multiple restore points below. Click further.

In the new window, we just have to click on the "Finish" button and the system will begin to recover from a certain point, in my case from 06/12/2016.

The system will ask you again whether you are really ready for recovery, a reboot will occur and, in fact, your system will be restored.

Windows 7 system recovery from the command line

For a number of reasons, you may need to restore Windows 7 using the command line. This is done quite simply, in the line already familiar to us through the "Start" we enter CMD.

We will see a command line window. Then after system32 we need to enter the following combination:

rstrui. exe

Let's press "Enter". We will run this command. After that, the system recovery window, already familiar to us, will open and it remains for us to perform the actions indicated above.

Restoring Windows 7 System in Safe Mode

It so happens that the user has done such an action on the computer that the system simply stopped starting in normal mode. Now we will apply "Safe Mode". To start it, while turning on the PC, at the initial stage, you need to hold down the F8 key (Different systems may have their own nuances).

Having booted the PC in this mode, we will open a command window (the familiar black window). Then, it remains for us to do the operation that we did using the command line, i.e. introduce rstrui. exe after system32. Then, we will be prompted to select a restore point and perform a system restore.

System restore Windows 7 without restore points

If you do not have restore points, you can perform this operation using the installation disc. This is the same drive you are using. Also, the Windows system allows you to record it yourself at a time when there are no special problems with it. We will talk about recording such a disc in one of the following articles.

So, insert the installation flash drive or disk and instead of the install line, select "System Restore".

Next, we will select the OS we need and move on to the recovery options. From this window, you can directly select "System Restore" and start it. You can choose "Command Line". In this case, we will do the recovery using the command line and the command rstrui. exewhich is described above.

All of the above is impossible if you do not have a restore point, so now we will look at how to create one.

How to create a system restore point

To create a restore point through "Start", enter "create" in the line. Among the commands that open, select "Create a restore point".

In the new window, select "System Protection".

Next, I would suggest you do a little tweaking. To do this, select "Configure". In the new window, I would advise you to pay for system recovery from 5% to 7%. Let's do this using the slider. Click "Apply", then Ok.

Then, in the previous window, select the create button. In the new window, enter the name of this restore point. You can just write a number for a given day and click create.

We start directly creating a restore point.

After its completion, if we check how many restore points there are now, you will have one more.

I would advise you to constantly monitor whether you have a restore point. There should be at least two or three of them. Just in case. This can greatly help you in the future if difficult situations arise in the system or if you have spent windows settings, but they do not suit you and you want to return the previous settings.

Friends, if you decide to reinstall the system, I suggest you install it not on the usual hDD disk, but on a solid state drive SSD, as I did. Buy it you can on Aliexpress... Disks on the page are from 120 to 960 GB, i.e., actually 1TB. Judging by the description, the disk is suitable for both Computers and (laptops).

In the screenshot you can see the volumes of the disks. If you just need to install the system, just buy a 120 GB disk. If, however, how full hDD, then, at your discretion, from 480 to 960 GB. Why do I recommend installing Windows on a solid state drive? Your system will boot in seconds! If you buy a 1TB disk, all your programs will fly!

A rollback point, or restore point, is the saved state of the system as of a specific date. Rollback points can be manually created by the user and the system automatically on a weekly basis or before a configuration change such as installing a driver or program. In this case, only the state of the system files is recorded. User-created documents (text files, photos, videos, music) are not saved.

How to create a rollback point

For restore points to be created, this feature must be enabled. Right-click on the "My Computer" icon, select "Properties" and go to the "System Restore" tab. Uncheck the box next to Disable System Restore.

If your computer is running Windows XP, to manually create a restore point, press the Win key and in the "Programs" group go to the "Accessories" section, then "System Tools" and select the "System Restore" program. Check "Create a restore point" and follow the instructions.

In Windows 7, click Win, right-click on Computer and check Properties. On the left side of the window, click System Protection, go to the System Protection tab and click Create. Then follow the instructions.

How to restore the system

To restore the system in any version of Windows, you will need administrator rights. On a computer running Windows XP, click Win, under Programs, select Accessories, then System Tools, and then System Restore. Check "System Restore", click "Next" and mark the desired date in the calendar that the recovery program will offer you. Choose the date that is closest to the fatal event after which recovery was required.

In critical cases, when the system does not boot, restart the computer and press F8 after the initial polling of the hardware. In the boot options menu, check "Load last good configuration", then in the proposed calendar, specify the date when the computer worked correctly.

To start System Restore in Windows 7, go to the Control Panel and follow the link "Security System". In the new window, select "Backup and Restore", then "Restore system parameters or a computer ". Click "Start System Restore" and follow the instructions of the restore wizard. Alternatively, you can use System Restore under Programs or Last Known Good Configuration as described for Windows XP.

You can cancel System Restore if you are not satisfied with the result. Click Start, under Programs, select Accessories, then System Tools, and then System Restore. Click "Cancel System Restore" and follow the instructions of the wizard.

Details Category: Computers, Software Published on 15.09.2012 23:14

Sometimes there are situations when you just need to return the early state of Windows. This happens, for example, when a program that worked earlier stops working for us, or we want to erase the state of the system after a virus attack. In any case, this feature is very, very useful. With the help of it you can return your desktop, files that were not so long ago.

How do I restore a Windows 7 system?

To restore the "seven" from a checkpoint, we need to do the following:

1. Press the key combination Win + R.

2. In the "Run" window that appears, enter in the " rstrui", click OK.

3. In the window, check the "Show other restore points" checkbox.

4. Select the point you need, depending on the situation. For example, if a computer has become infected with viruses today, it is advisable, if possible, to choose yesterday's point or another, but as close as possible to the moment of infection, the main thing is not later.

You have performed restoring an earlier state of your system. If you don't like the result, if possible roll back the changes in the same recovery window.