How to fix red screen on iPhone 5s. Red screen on iPhone

Users Apple smartphones sometimes they encounter malfunctions. One of these is the red screen on the iPhone 5s. This article will discuss how to fix this problem.

Causes of malfunction

A red screen on iPhone (analogous to the blue screen of death on Windows) is a sign of a critical error. Factors causing it:

  • impacts from falls or collisions of the smartphone, which damages the integrity of its connectors;
  • contact of the inside of the gadget with water or other liquid, which causes oxidation of parts;
  • the use of Chinese chargers, which cause voltage drops;
  • installation of unlicensed software or software containing serious errors;

Solution options

In the vast majority of cases, the problem is a damaged cable that needs to be replaced. To do this, contact the service center. This also applies to situations where a non-original charger is used.

If the problem occurs after using some application, you need to restore the system through iTunes on your computer. To do this:

  1. Install on PC latest version iTunes.
  2. Connect your phone to your computer using a USB cable.
  3. To reset your gadget, press and hold the Lock and Home buttons.
  4. Once the Apple logo appears and disappears, release only the Lock button. iTunes will display a dialog box.
  5. Follow the program instructions to restore your phone.

If water gets inside the iPhone, do not contact the company center (even if it is under warranty), but immediately go to a regular service center, because Apple warns about such situations and does not provide assistance or replacement parts.

Pay attention! There is a high probability that the liquid could have turned the phone into a “brick”, because only the iPhone 7 and above are waterproof. Read more about the moisture protection of iPhones in ours.

Conclusions

If the screen turns red on the iPhone 5s, you need to determine the cause of the malfunction and contact a service center indicating it. If a problem occurs due to software, you need to restore iOS via iTunes on your computer.

At one point my iPhone 6 decided to reboot and never turned on again. Instead, it kept trying to boot, only to get a red screen of death. They write on the Internet that this problem can be solved by ordinary restoration. Some of you will not be able to cure your smartphone, in this case I advise you to take it to a service center, and they will either replace or repair your device under warranty.

Step 1: Connect iPhone

Open iTunes and connect your iPhone using a USB cable.

Step 2: Reset settings

To reset your iPhone, press and hold the two Sleep/Wake and Home buttons simultaneously until you see the Apple logo - DO NOT RELEASE THE BUTTONS.

Step 3: Enter DFU (recovery) mode

Hold down the Sleep/Wake and Home buttons until the Apple logo disappears. After 3 seconds, release ONLY the Sleep/Wake button (the one on the side) and continue holding Home button(round) until you see iTunes issue a notification.

Step 4: Restore iPhone

Follow the instructions that appear on the screen. As a result, you will have to click the “Restore” button.

Step 5: Final Recovery

So, now you can either set up your iPhone as new or restore it from a backup button.

ATTENTION! If you followed all the steps in this article and still did not fix the problem, then take your device to service.

Therefore, tomorrow I will go to the service center to find out what the problem is. Stay tuned!

UPD 1: I handed over my smartphone to the “Your Mobile Service” service. They said they would either fix it or replace it within a week and a half.

UPD 2: I received an SMS from the service:

Your IPhone 6 device according to application 10746 dated 11/10/14 is ready to be returned from repair.

I called and you can actually pick up the phone. I came to the service center, and they brought me a brand new iPhone 6. In general, they replaced my smartphone, and the next day after I contacted the service center.

My iPhone 6 started randomly turning off last night so I let it charge overnight and this morning everything was red. My iPhone is stuck on a red screen. I've been reading on some forums and they call this Red Screen of Death (RSOD). What causes this iPhone screen problem? Can this be fixed? Thank you very much!

What is a Red Screen of Death (RSOD)?

The Red Screen of Death is a known nightmare for iPhone 6 users. This problem has been circulating all over the internet for quite some time, especially in several forum threads asking for help or solutions on how to fix this unexpected iPhone red error.


When this error occurs, your iPhone's screen will turn red and reboot after one to five seconds. The process will continue even if the phone itself continues to reboot.

There is another one very similar software error, which can happen on your iPhone 6. This is the so-called having .

In this case, you will receive blue screen instead of a red screen.

But for possible reason RSOD and BSOD are the same, either due to a faulty software or malfunction of its hardware components. The first thing you can do is call Apple customer service if your phone is still under warranty.

Then you can get a replacement.

Or else,

There are also some basic steps you can try to fix the problem yourself.

2. How to fix iPhone screen frozen on red screen

You can learn more about how to use FoneLab to fix .

Method 1: Restart your iPhone

You may have already tried this, but if not, it's still worth a try.

Some users have reported that with a simple restart, many issues including iPhone frozen, crashing, not responding, etc. can be fixed. Follow these simple steps to do this:

Turn off your iPhone by pressing and holding power button until you see Slide to switch off bar.

And then swipe right.

Wait a minute after the phone turns off completely, then press and hold power button until you see the Apple logo.


For iPhone X/XS/XS Maximum , you should follow below tutorial:

Press and hold power button and either Butto volume n until the slider appears.

Press and hold power button


Method 2: Do a hard reset

If a soft restart fails to resolve the issue, try the next step to perform a hard reset.

To do this, press power And Home Press at least 10 buttons at the same time until the Apple logo appears on the screen. Release the buttons and let it reboot.

Press and hold power button and either Butto volume n until the slider appears.

Drag the slider to turn off your iPhone X completely.

Press and hold power button again until you see the Apple logo.


As you know, iPhone X/XS/XS Max does not have a home button. Can you do hard reset your iPhone X?

Of course you can!

Press and release quickly Volume Up Button.

Press and release quickly Volume Down Button.

Press and hold power button for about 10 seconds until you see the display suddenly turn off.

Hold power button and release when the device reboots.

Method 3: Enter iPhone into DFU Mode and Restore using iTunes

This step requires backup, as it will erase your device and all your data and settings will be completely deleted. If you don't have backup copy, I will not suggest that you take this step in order to .

However,

You can definitely restore normal iPhone work, restoring DFU mode.

iPad, iPhone 6 and below, iPhone SE and iPod touch:

Connect your iPhone to your computer using a USB cable, then press and hold power And Home buttons for seconds 8.

Hold Home

iPhone 7 and iPhone 7 Plus:

You have to press and hold power buttons and Volume Down instead of buttons for 8 seconds.

Hold power button until you see nothing on the screen.

iPhone 8, iPhone 8 Plus and iPhone X and later:

While iPhone 8 and later devices, you need to quickly press and release Volume Up and then Volume Down button and then press and hold power button until it turns black.

After ten seconds, release power button, but keep holding it Volume Down for 5 seconds.

If your device displays a screen saying that your device is connected to iTunes, which means your device is in recovery mode, repeat these steps.

To me, the red screen in iPhone 5s, iPhone 5, iPhone 5s, iPhone 7... reminds me of the communist regime that killed millions of innocent people, but I hope that your smartphone will bypass this prospect.

Usually the red screen lights up when turned on and, judging by experience, this most often happens with the iPhone 5s - less often in the iPhone 5 and iPhone 6.

If the screen turns red and the phone does not turn on, the first thing we recommend doing is force a restart.

To do this, press the Home + Sleep/Wake buttons at the same time and hold for ten to fifteen seconds.

Only this operation solves the problem for a short time, which means that the “red screen” may recur. What to do? Let's look below.

NOTE: There is also a great app that will check your iPhone screen and, if any errors are found, provide instructions on how to fix them - I already have one

Potential Causes of a Red Screen on iPhone

Most likely, there is an aceatsa software error caused by a corrupted backup archive. You can try to restore the process (recovery) with using iTunes aceatsa to solve the problem.

The second reason: a hardware error in one or more iPhone components. In this case, you need to contact Apple service.

I've been using iPhone since the first generation. IPhone X is my seventh Apple phone. Through all these generations, I have sometimes had to deal with defects.

My drama with the appearance of the red screen took place unexpectedly on Sunday. On this day I used mine new phone quite intense.

Late in the evening I had a fairly long two-hour conversation after which the battery died.

I connected the phone to charger and moved on to other things. 15-20 minutes passed when I realized that something was wrong.

The apple was still burning on the screen, and after 2-3 seconds I saw the “red screen of death” for the first time.

The first thing I did was reset the phone, but the red screen appeared again, after which it rebooted and again, and this cycle repeated.

Attempts to restore the software in recovery mode and even in DFU did not help.

However, it was impossible to completely restore the software. Each time, this process was interrupted by a red screen followed by a reset.

The problem appears to have started after upgrading to a more recent iOS. I fixed this by installing the penultimate version, but your reason may be completely different. One of the solutions is a program that corrects errors in iOS.

Program to fix red screen on iPhone

The program is called ReiBoot. Although of course there is no 100 percent guarantee that it will fix everything, I recommend trying it

For downloading The program has been tested and it will not delete any of your files - you can be sure.

To use it you will need a laptop/computer and a connecting cable (from the charger).

If the red screen appears after a fall or impact, then of course you should not install the program.

Other solutions to red screen problems on iPhone

After the impact, the connection between the connectors could be disrupted. Replacing the cable or connecting it will solve the issue in this case.

If water gets in, depending on the degree of oxidation, hardware parts may need to be replaced - from a banal power connector to the very heart of the gadget - the iPhone processor.

If you use Chinese chargers, then due to unstable voltage you may need to replace the u2 chip or NAND controller.

Using unlicensed apps or jailbreaking can also result in a red screen and can be resolved by doing a full factory reset or flashing the firmware from an iTunes backup.

If the iPhone has not been dropped on the floor after water (safe and sound) and is still under warranty, then it is better to immediately take it to an Apple service point, where it will be replaced under warranty.

iPhone red screen of death and error 4013

error 4013 may mean a malfunction of the Wi-Fi module, accelerometer, battery connector, problems with sensors... .

Also, error 4013 may be due to the use of a Chinese cable when updating via iTunes.

Apple employees have reduced the update time to a minimum, so that Chinese substitutes do not have time to transmit the signal.

The last option is flashing. You can do it yourself. There is nothing complicated. Good luck.

Why does the red screen on iPhone 6 light up when I turn it on? What is this connected with? What to do when you constantly Red screen on iPhone 6? DIY instructions and repairs Will they help correct the situation or is there no way to do without the help of experienced service center specialists?

Instructions: In the problem under consideration, there are several types of breakdowns and, logically, different variations of their elimination.

  1. If you previously flashed the firmware of the communicator being analyzed, then, most likely, this is what caused its malfunction. It is necessary to eliminate software defects, and for this we recommend making a new licensed firmware;
  2. Presumably the processor has failed. To confirm this version, you will have to do computer diagnostics. If the processor is still faulty, then it can actually be repaired, but this is a rather complicated type of work;
  3. If the iPhone 6 gadget was dropped or got wet before glitches appeared, it means that the device’s board has suffered from mechanical damage or corrosion. We carry out restoration only after receiving the results of the initial inspection.

Result: The first option can be eliminated at home on your own, but if the 2nd or 3rd option is discovered, then they can only be eliminated by professionals service center TV mom.

You are offered 2 options to solve the problem. Choose which one is more convenient.

Repair at the Apple Telemama service center

DIY repair

Our advantages

  1. We select only original, impeccable quality spare parts for installation.
  2. Price. We order the necessary components from the manufacturer in large quantities, and then we will offer them to you at a reduced price.
  3. Repair time. On average, it takes about 20 minutes to install a display, connector, speaker, etc. If a more serious fault is found, then we will spend another 20 minutes examining the device.
  4. 1 year warranty.

If your communicator is broken and you don’t know how to fix it yourself, then contact the employees of our service center - they will come to the rescue. To make it more convenient for you, we have organized a courier delivery service for equipment. But, if you wish, you can personally deliver gadgets to the SC.

In our unique service, computer diagnostics are carried out absolutely free. We will agree on the cost of services with you and begin to implement them. Installation of original replacement components is done by experienced professional technicians. The quality and effectiveness of their work is confirmed by a long-term guarantee.

After we fix the iPhone 6, you can pick it up from the service yourself or entrust it to our courier. A one-year warranty will be issued in each option. After that, you and your friends will have your equipment repaired with us at a discount. To receive a discount, please provide your order number.

Our Telemama service center has been repairing and selling components for equipment for a long time. We also offer advice from specialists on how to independently repair these communicators if, when turned on, the screen starts to glow red, or other problems arise.

The price in the price list is written down in detail and clearly.

Regular customers do not need additional discounts, because minimum prices are offered to them every day.

Under the terms of promotions that are regularly held, you can repair your communication device at cost and with a 1-year warranty.



You might be interested