Boot menu on lenovo laptop. The order of launching the Boot Menu for different models of motherboards

If necessary, use a flash drive or external HDD. To not change several times BIOS settings Well, you can simply boot into the Boot Menu once without changing any settings, select a disk to boot, perform all the necessary operations, and then simply reboot the PC and work on it as usual. In today's article, we will discuss in detail how to enter boot menu on laptops and desktop PCs from various manufacturers and a huge variety of brands.

What is the boot menu? In fact, this is one of the built-in features of UEFI or BIOS, which makes it possible to quickly choose which external storage device to boot the PC from this time. The presented chip can come in handy if you have to boot from a bootable flash drive or from a LiveCD. On a number of laptop models, the same menu provides access to the device overhaul category.

How to enter the Boot Menu on a laptop or desktop computer? Similar to calling the BIOS, one of the hot keys is used for this (most likely F12, F11 or Esc, but there may be other options). It may happen that the data on the corresponding hot key to call the Boot Menu appear on the screen immediately when you turn on the PC, but this does not always happen.

When is it worth using the Boot Menu, and when is it better to change the BIOS settings? If you need to boot from a USB flash drive once (for example, check your computer for viruses using a special disk, or install new version OS), it would be more logical to use the Boot Menu, but if you need to change the boot priority of devices (for example, install boot from DVD first), and not just once, but permanently, then, of course, it would be more expedient to change BIOS settings.

In the boot menu, you can see a list of all devices connected to the PC from which you can currently boot the computer (these can be laser drives, external HDDs, flash drives), as well as, potentially, the option of network booting the PC from the backup partition.

What to do if you can't enter the Boot Menu?

For laptops or PCs originally shipped with Win 8.1/8/10, it may not be possible to activate the boot menu using the hot buttons mentioned. The thing is that workstations based on this OS, in fact, do not even turn off, but only enter the hibernation status. Therefore, the Boot Menu may not be activated after pressing F12, F11, Esc and other keys.

Under these circumstances, you have the right to resort to one of the following methods:

1. While selecting the "Shutdown" menu item in Win 8 / 8.1, hold down the Shift button. In this case, the PC will turn off completely and the next time the buttons are turned on to activate the boot menu will be active.

2. Instead of turning the PC off and on again, use the reboot, for which you should click the appropriate button.

3. Deactivate express start. To do this, open the control panel, select the option "System and Security" -> "Power Options" -> "Actions of the power buttons".

One of the methods above should certainly help in solving the problem of activating the boot menu, if you have done all the other iterations correctly.

How to enter the Boot Menu on an Asus device (for motherboards and laptops from the presented brand)

In fact, if you own a stationary PC based on an Asus motherboard, you can enter the Boot Menu on it by pressing the F8 button after the computer is turned on.

But in the situation with a laptop, some nuances may arise. To activate the boot menu on an ASUS laptop of a certain modification, while turning on the device, press:

Esc - relevant for most of the current and not too models;

F8 - for those varieties of ASUS devices, the capital letter in the name of which is the letters x or k (for example, k601 or x502c).

Be that as it may, the variability here is not so great, so if necessary, you can use any of the proposed options.

How to enter the Boot Menu on a Lenovo laptop?

For almost all laptops and desktop computers of the Lenovo brand, you can use the F12 button when power is applied to activate the boot menu.

Moreover, auxiliary loading methods for Lenovo devices can be found by using the miniature button with an arrow on it, located near the power button.

How to enable Boot Menu on Acer device

Another very popular variety of desktop PCs and laptops is Acer. To enter the boot menu on a device of this brand, pressing F12 during power-up is required.

However, in relation to laptops, such a feint is not always effective, and in order for this method to become possible, you must first enter the BIOS by pressing F2, and then set the “F12 Boot Menu” setting to Enabled in the parameters, and only after that save all changes made and exit BIOS mode.

Other devices based on components from other brands

For other brands, the situation with using the Boot Menu is slightly different. Below I will give a detailed list of devices and their corresponding buttons to activate the menu:

-ASRock-F11

- MSI motherboards - F11

- ASUS motherboards - F8

- Intel motherboards - Esc

- Gigabyte motherboards - F12

- Toshiba laptops - F12

- Samsung laptops - Esc

- Dell laptops - F12

- laptops and desktop PCs HP - F9 or Esc.

That's all the common devices and descriptions with which you can learn how to enter the Boot menu. We hope this article will serve you well, and you will be able to quickly, easily and painlessly perform all the necessary operations with your PC that the boot menu requires. On this, allow me to take my leave.

You have a bootable DVD or flash drive, now you need to make sure that the computer can boot from them.

There are 2 ways to boot your computer from a DVD or flash drive:

Selecting a device in the boot menu
Changing Boot Priority in BIOS

Each method has pros and cons.

If you need, for example, to install Windows, then it is more convenient to choose the first method. And if you are constantly working with boot disks, then the second method is more convenient.

Features of device selection in the boot menu

On older computers motherboards ah) the function is missing. In this case, you will have to change the priority in the BIOS.
When you select a device in the menu, the computer boots from this device 1 time. This is convenient when Windows installation- no need to return the download from the HDD after the first reboot.

Features of changing the priority in the BIOS

Works on both new and old computers.
The priority change is permanent, i.e. valid until the next change, and not one download as is the case with the menu. This is not very convenient when installing Windows from a USB flash drive, you have to return the boot from the HDD after the first reboot.

How to enter the boot menu or BIOS?

There is no universal button for entering the boot menu or for entering the BIOS. It all depends on the manufacturer of the computer (motherboard), they are all different - the keys are also different. The most correct way to find the right key is to read the instructions from the computer (motherboard). For some of the most common boards, the keys are listed below.

There is only one time when you need to press these keys - during self-testing immediately after turning on the computer (English - Power-On Self-Test or POST). Without going into details, POST lasts from turning on the computer until the operating system starts loading (appearance of the logo or OS selection menu). The POST pass looks something like this:

The screen prompts: Press DEL to run Setup which means click DEL to enter BIOS Setup. DEL is the most common key, but there are many others - more on that below.

During POST, a graphical splash screen with the name of the manufacturer of the computer or motherboard may be displayed.

Keys to enter the boot menu and brief instructions

As noted above, each manufacturer has its own key to enter the boot menu. Here is a short list of the most common ones:

The boot menu looks like this:

You just have to select the desired device from the list. If everything is done correctly, the disk or flash drive is written correctly, the download / installation should begin.

Keys for entering the BIOS and brief instructions for changing the boot priority

To enter BIOS Setup, use the key corresponding to the manufacturer of the computer or motherboard, here is a small list of them:


Acer (Aspire, Altos, Extensa, Ferrari, Power, Veriton, TravelMate):	F2 or Del
Acer (old models):	F1 or ctrl+alt+Esc
	F2 or Del



Compaq (Deskpro, Portable, Presario, Prolinea, Systempro):
Compaq (old models):	F1, F2, F10, or Del
Dell (Dimension, Inspiron, Latitude, OptiPlex, Precision, Vostro, XPS):
Dell (old and rare models):	ctrl+alt+Enter or fn+Esc or fn+F1 or Del or reset twice
ECS (Elitegroup)	Del or F1
eMachines (eMonster, eTower, eOne, S-Series, T-Series):	Tab or Del
eMachines (some older models):

Fujitsu (Amilo, DeskPower, Esprimo, LifeBook, Tablet):

Hewlett-Parkard (HP Alternative, Tablet PC):	F2 or Esc or F10 or F12
Hewlett-Parkard (OmniBook, Pavilion, Tablet, TouchSmart, Vectra):

Lenovo (3000 Series, IdeaPad, ThinkCentre, ThinkPad, ThinkStation):	F1 or F2
Lenovo (old models):	ctrl+alt+F3, ctrl+alt+Ins or fn+F1
MSI (Micro Star)
	F2, F10 or Del

Sony (VAIO, PCG-Series, VGN-Series):	F1, F2 or F3
Toshiba (Portege, Satellite, Tecra):	F1 or Esc

You will find less common hotkeys for entering the BIOS.

In addition to the fact that there are several major BIOS manufacturers (AMI, Phoenix - Award), computer (motherboard) manufacturers also modify the BIOS for a specific model. As a result, you cannot create universal instruction even by changing one function (boot priority), there will be differences on each computer. You can only roughly show how this is done, and look for exact instructions in the documentation for your computer (motherboard).

Use the arrow keys on your keyboard to navigate through the BIOS and change settings. Enter And + \- .

AMI

Move arrows to the tab Boot, go to boot device priority:

In the following figure, we see that the boot is sequentially performed: from the floppy drive (Floppy Drive), hard drive (Hard Drive), and the third device is not used (Disabled).

If we want to boot from a DVD, we need to change the priorities so that the first device is the DVD drive. Arrows switch to the first device ( 1st boot device), press Enter and select from the menu that appears CDROM. It's the same with a flash drive.

Click F10 and confirm the exit with saving (Save and Exit) by choosing .

Phoenix Award

Entering Advanced BIOS Features:

If we want to boot from a DVD, we need to change the priorities so that the first device is the DVD drive.

Arrows switch to the first device ( First boot device), change to CDROM. It's the same with a flash drive.

Click F10 and confirm the exit with saving (Save and Exit).

Know other keys or want to clarify? Comments are open!

Happy using!

What is the Boot Menu (boot menu), why is it needed and how does it replace the BIOS. In fact, when choosing devices, the boot menu is the best to use. More details below.

All more or less experienced computer users know that when installing the OS, or using a tool from disk media or a flash drive, it is necessary to set the priority of these devices in the BIOS, in simple words– what will be loaded in the first place when you start your PC. For this you can use.

boot menu(boot menu) - boot menu designed to simplify the selection of devices from which it is possible to boot. You turn on the computer, go to the boot menu using special keys, and then use the arrows to select the boot device, for example, a USB flash drive or a floppy drive. This makes it easier for inexperienced users to do many things.

Now we will learn how to enter the Boot Menu using the usual keyboard shortcuts. And also how to do it on laptops.

How to enter the Boot Menu - BIOS boot menu

When we enter the BIOS, we press a certain combination on the keyboard. In the case of the Boot Menu, the same is true. In many cases, for laptops and motherboards, the following methods are relevant: Esc, F11, F12, although there are other options to enter the boot menu.

It makes sense to use this feature if you do not need to change any parameters in the BIOS, except for setting the boot order.

So, if you have a laptop with Windows 8, and now with Windows 10, the above keys are not a fact that they will work. In some models, when you turn off the laptop, the device can be considered to go into hibernation mode, and not turn off as usual, so an attempt to enter the boot menu fails.

To get rid of this problem, you can use the following methods:

How to enter the Boot Menu from an Asus laptop

The most possible login options for Asus are the following keys:

ESC - for many brands;
F8 - for devices where names can start with the letters X and K, if it doesn't work, then use Esc.

Entering the boot menu from a Lenovo laptop

In these models it is even easier, you press the F12 key and get into the boot menu. Also on many laptops of this brand there is a special button with an arrow that allows you to select the type of boot, for example, BIOS, Boot Menu, or recovery mode.

and translate the option there F12 Boot Menu to the enabled position - Enabled. Then we save the applied actions, reboot and try to log in again using the F12 key.

Entering the Boot Menu of an HP laptop

I have a laptop of this brand, so I know a lot about it. You can enter the boot menu from this device as follows:

Esc is a fairly common option;
F9 - by pressing the Esc key.

Entering the Boot Menu on other models of motherboards

In the options described by me below, almost the same as described above, that is, the same keys:

Dell laptops - F12 key.
Toshiba - F12 key.
Samsung - Esc key.
Motherboards from Intel, FoxConn, Phoenix-Award - Esc key.
Gigabyte motherboards - F12 key.
Board from Asus, AMI - key F8 or F11, as on laptops.
MSI, ECS, AsRock, Sony - F11 key.
BioStar - F9 key.
Asus AMI - ESC key.
Fujitsu-F12.

Here, I have described most of the models. If you are unhappy that your laptop or motherboard model is not listed, please leave a comment and I will try to help you. You will always find more details in the instructions for your system board computer or laptop. If there is no paper version, look for an electronic one on the Internet.

Why the Boot Menu does not work on a laptop

If your boot menu refuses to work, that is, it does not start or does not see the connected devices, then there are a number of explanations for this.

It turned out that on some laptops this mode does not work for the simple reason that UEFI mode is enabled, and not BIOS Legacy Mode. In this case, you can try to enable either Legacy BIOS or UEFI and check the boot menu.

The second reason is a rare failure. In this case, it does not go out to enter both the boot menu and the BIOS. It is usually easy to treat - by turning the computer off and on again. The second way is by removing the CMOS battery.

It is possible that the boot menu on your device is turned off, and on some laptop models it is possible to turn it on. Go into the BIOS and find the F12 Boot Menu item there, which should be set to the Enabled position.

Do you want to boot your computer from a flash drive or disk? To do this, it is not necessary to enter the BIOS settings. Especially if you don't understand much about it. After all, there is an easier way. In this case, just go to the Boot Menu and change the device boot priority. This is done in 10 seconds. And most importantly - no shamanism in the BIOS.
Boot Menu - what is it
What do users usually do to reinstall Windows? As a rule, they write a bootable USB flash drive via UltraISO, and then they configure BIOS to boot from a USB flash drive. In principle, this is not difficult, but there is a simpler option - calling the Boot Menu. What's this?

Boot Menu (or boot menu) - this is extremely useful option BIOS. With it, you can quickly set the device boot priority. Simply put, launching the Boot Menu brings up a small window in which you can immediately put a USB flash drive (or DVD drive) in first place, and HDD- for the second. In this case, you do not need to enter the BIOS.

Also, changing the settings in the Boot Menu does not affect the BIOS settings. That is, this option works once - for one inclusion. And when you restart your PC, Windows will boot from hard drive(normally). If you need to run again Windows installation from a flash drive - call the Boot Menu again.

If you remember, when changing the settings in the BIOS, you had to go into it again and change the device boot priority back (that is, put the hard drive in first place). And in the case of the Boot Menu, this is not necessary.

How to open Boot Menu? Very simple - just click on Windows boot one key. Which one? It depends on the:

BIOS version;

motherboard;

laptop models.

That is, the situation is exactly the same as with the BIOS. For example, to enable the BIOS on a laptop, you had to press the Del or F2 button, then to open the Boot Menu you need to click another.

Most often it is Esc or F12. Although, as mentioned above, on different PCs, the Boot Menu call button may differ.

Therefore, below we will look at how to launch the Boot Menu on popular brands of laptops and personal computers.
How to enable Boot Menu on Lenovo laptops
Owners of Lenovo laptops should not have any difficulties. After all, the Boot Menu on Lenovo is launched very simply - by pressing the F12 key when loading Windows.

Plus on the body of many models there is special button with curved arrow. You can click it if you want to choose additional. download options.
How to open Boot Menu on Asus
Here it is immediately worth noting that there are Asus motherboards (installed on a PC) and laptops of this brand.

Launch the Boot Menu on a computer with a mat. The Asus board is as easy as shelling pears - you need to press the F8 key when it boots up (at the same time that you usually enter the BIOS).

And with Asus laptops there is a bit of confusion. It seems that the manufacturer is the same, but there are several buttons for launching the Booth Menu. After all, launching the Boot Menu on Asus laptops carried out using one of two keys:

Most often this is the Esc button, although it can be F8. However, there are only 2 keys, so you will quickly figure out which one is responsible for launching the Boot Menu on your Asus laptop.
How to call the Boot Menu on Acer laptops
Boot Menu on Acer is opened by pressing the F12 button. But there is one small nuance here. The fact is that usually the launch of the Boot Menu on Acer laptops is disabled. And when you press F12, nothing will happen. To make it work, you need to do the following:

Enter the BIOS (when booting the laptop, press the F2 button).

Go to the "Main" tab.

Look for the line "F12 Boot Menu" and change the value "Disabled" (off) to "Enabled" (on).

Save the changed settings and exit the BIOS.

The system will reboot and you can access the Boot Menu on your Acer laptop using F12.
How to enable Boot Menu on Samsung laptops
To call the Boot Menu on Samsung, you must press the Esc key. But Samsung laptop owners need to know one thing. The fact is that to call the Booth Menu, you must click the Esc button once! If you press twice, the window will simply close.

Therefore, you will have to get used to it in order to know exactly when to press the Esc key. Although there is nothing complicated here - just a couple of attempts, and you will enter the Boot Menu on a Samsung laptop.
How to enter the Boot Menu on HP laptops
Launching the Boot Menu on HP also has its own specifics. After all, the opening of the Booth Menu is carried out somewhat differently. To enter the Boot Menu on an HP laptop, you need:

At turning on Windows immediately press the Esc key.

The launch menu will be displayed - press the F9 button.

Ready.

After that, the Boot Menu of the HP laptop will open, and you can set the priority for turning on devices (using the arrows).
How to enter the Boot Menu on Windows 10 or 8
All of the above methods allow you to run the Boot Menu on Windows 7. If Windows 8 or Windows 10 is installed on your PC or laptop, then you most likely will not be able to enable the Boot Menu.

The fact is that these operating systems have a small feature - by default they have "Quick Startup" enabled, so they do not turn off completely. This is called hibernation (something like sleep mode). Therefore, when loading a PC or laptop, opening the Boot Menu on Windows 10 will not work.

You can fix this in three ways:

Hold Shift when turning off your laptop or PC. After that, it will turn off normally (in the usual sense of the word). And then you can launch the Boot Menu on Windows 10 by pressing the desired key.

Instead of shutting down the PC, you can restart it. And at the moment of switching on, just press a certain key corresponding to your brand of laptop or motherboard.

Turn off the Quick Start feature. For this:

That's it - now you can easily enter the Boot Menu on Windows 10 or Windows 8.
List of keys to enter the Boot Menu
For your convenience, below is a screenshot showing the keys to launch the Boot Menu for popular laptops and PCs. For example, for computers running on the mat. MSI board is the F11 button. And launching the Boot Menu on Sony VAIO laptops is done using F12. In general, you will figure it out yourself - the table is simple and understandable.

Also, for convenience, buttons for entering the BIOS are written. If for some reason you cannot open the Boot Menu, you can always change the device boot priority in the standard way - through BIOS.

Out of habit or ignorance, some computer and laptop users use the BIOS or UEFI menu to boot from a device that contains files for installing Windows, to start a LiveCD, or backup copy systems. But for this you can use the Boot Menu, especially since this option is more practical and simple. It is enough to call the menu with a special key and select the device (hard disk, USB flash drive, DVD drive) from which the boot will be performed.

You can learn how to enter the Boot Menu on laptops and computers from this guide.

Since manufacturers do not have a specific rule for assigning a button to call the Boot Menu, each of them chooses the one that they think is ideal for this task. This manual lists the keys that, in most cases, allow you to display the boot menu. In addition, the nuances of calling it on laptops with pre-installed Windows 10 are mentioned here, and examples are specifically given for laptops from Asus, Lenovo, Samsung and others, as well as motherboards from Gigabyte, MSI, Intel, and so on.

General information on entering the BIOS boot menu

Both for entering the BIOS or UEFI, and for calling the Boot Menu, manufacturers provide special keys. In the first case, this may be Del, F2, or a combination Alt+F2. The second one can use Esc, F11 or F12, but there are exceptions, which are given later in the article. Usually, the Boot Menu key prompt is displayed on the screen during computer startup, but this does not always happen.

Features of loading Boot Menu on Windows 10

On Windows 10 laptops and computers, the above keys may not work. This is because the shutdown in this operating system is not exactly one. This process is more like hibernation. Therefore, when using F12, F11, Esc and other boot menu keys may not appear.

In this case, one of the methods below can help to enter the Boot Menu:

How to call Boot Menu on Asus

In the case of Asus motherboards, the Boot Menu can be entered using the key F8 immediately after turning on the computer. Actually, as when trying to enter BIOS or UEFI with the keys Del / F9. On ASUS laptops, one of the options can be used - entering the Boot Menu with the key F8, or Esc.

How to enter the Boot Menu on Lenovo laptops

On almost all monoblocks and laptops from Lenovo, the key is responsible for launching the Boot Menu. F12. It, like on other devices, must be pressed when turned on. There are also models where a separate small button with an arrow is provided to enter the boot menu. Often it is located near the power button.

How to open Boot Menu on Acer laptops

Acer laptops and monoblocks have a single key to enter the Boot Menu - F12. However, go to this menu only possible after enabling the special option. To activate it, you need to get into the BIOS when you start the computer using the key F2 and change state Disabled on the Enabled opposite the item F12 Boot Menu in the main BIOS settings.

Other models of laptops and motherboards

Below is a list of keys for entering the Boot Menu on laptops and PCs with motherboards from different manufacturers.

Motherboards:

Gigabyte - F12.
MSI-F11.
Intel - Esc.
As Rock - F11.
American Megatrends - F8.

Laptops and monoblocks:

HP - F9, or Esc, and then the F9 key.
Dell - F12.
Samsung - Esc.
Sony-F11.
Toshiba-F12.
Packard Bell - F12.

Boot Menu is a menu that allows you to select the device that the system will process in the first place. This function is actively used to replace operating systems and for diagnostics, like random access memory with memtest.

Such a function is extremely convenient, as it is intended for a one-time launch of equipment as the main carrier. This same function is required when installing Windows, as it does not require a change of priorities.

After completing the steps necessary to enter the menu, all devices that are currently connected to the computer and with which the program is potentially likely to be launched will be displayed.

Unfortunately, there is no single denominator in the issue of entering the described menu, since there is no strict standard in this industry yet. However, there is a dependence on the manufacturer and the actions required to launch the Boot Menu, which will be discussed in detail in the article.

General information on entering the Boot Menu

The Boot Menu is used to specify from which device the program should be launched. Of course, the BIOS already has such functionality, but for one-time use, such as programs, it is better to use the boot menu.

An interesting question is how to call the boot menu on the motherboard because there are no standards in this regard. Each manufacturer uses different options. Most often, a hint appears on how to go to the section. In general, the F8, F9, F11, F12, and Esc buttons are used.

To launch the desired menu, press the key corresponding to your brand of motherboard during system startup. Often, several of the above buttons are used. You can get more accurate information by going to the section that corresponds to the manufacturer of your computer.

There are also slight differences in the launch of the required menu in monoblocks and laptops that have pre-installed Windows 8 and higher.

How to enter the boot menu on a netbook? – The situation is complicated by the fact that portable computers may not use full shutdown, instead hibernation. This option is fully justified, as it quickly returns the PC to working condition, but is not suitable for entering the menu. You only need to completely turn off the netbook, holding Shift, click on "Shutdown". If this does not help, then you need to configure the "Power Options" section.

Launching the Boot Menu in Windows 8, 8.1, 10

The whole point is that personal computers in this configuration, hibernation mode is most often used instead of the usual shutdown. Often this has a positive effect on the system boot time, and the processes launched in the last session are restored, but in this case this method is not suitable for us, for this, use one of the following options:

1. Restart the computer with the appropriate option in the menu, you do not just need to turn it off with the button and turn it on again, for the reason just described;

2. At the moment when you press the "Shutdown" button, hold down the Shift key, thanks to this procedure, the PC will turn off completely, then press the desired key at the time of startup;

3.You may need to disable fast startup.

Open the Start menu;
Go to "Control Panel";
Select the tile named "Power Options";

Follow the link "Actions of the power buttons";

Turn off the "Quick Start" item.

After performing these steps, at the time of system startup, you will need to press the required key, usually Esc, F8, F9, F11, F12. More detailed information on your motherboard model is indicated below in the corresponding paragraph.

Boot Menu entry for manufacturer Acer

This manufacturer on all configurations of computers, monoblocks and laptops uses the same key to enter the Boot Menu, this button is F12. A distinctive feature is only the item in the BIOS or UEFI, which includes the necessary handler, that is, nothing will happen until you enable this function, sometimes it works by default, for this:

1.Go to BIOS, press F2 or Del to boot;

2. Find the item "F12 Boot Menu";

3. You need to change the value to "Enabled";

4.Restart your computer.

After performing these manipulations, the boot menu should become available by pressing F12.

Boot Menu for Asus

For the vast majority of computers at the base of which this platform is located, you must press F8 to launch the Boot Menu, but with laptops everything is a little more complicated, there is some separation here.

For most Asus laptops, the Esc button is used, but this is more likely for more or less modern PCs, and for models that start with K and most with X, F8 can be used.

Entering the Boot Menu in Lenovo laptops

It is quite easy to go to the menu of interest thanks to the F12 key, it is used in all models. This situation also applies to monoblocks of the same manufacturer. A distinctive feature is a special button located on the case, next to the standard inclusion, usually a circular arrow is drawn on it, by clicking on it you can get to the menu special options system startup.

Information on other manufacturers

For most manufacturers, it makes no sense to describe instructions for switching to the Boot Menu, since the only difference is the required key, and everything else works according to the standard scheme, so:

Dell, Toshiba laptops and Gigabyte motherboards - F12;
Samsung laptops and Intel motherboards - Esc;
Notebook HP - F9;
AsRock and MSI-F Motherboards

This should be enough to launch the Boot Menu with any computer configuration, if you have a little-known manufacturer, you should use the instructions that should be presented on the manufacturer's website.

If you still have questions on the topic “How to enter the Boot Menu on a laptop and computer?”, You can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>

Do you want to boot your computer from a flash drive or disk? To do this, it is not necessary to enter the BIOS settings. Especially if you don't understand much about it. After all, there is an easier way. In this case, it is enough to enter the Boot Menu and change the device boot priority. This is done in 10 seconds. And most importantly - no shamanism in the BIOS.

What do users usually do to reinstall Windows? As a rule, a licensed digital copy is recorded on, and then performed.

How to call the Boot Menu

It is very simple - to click one key when Windows boots. Which one? It depends on the:

BIOS version;
motherboard;
laptop models.

That is, the situation is exactly the same as with the BIOS. For example, in order to have to press the Del or F2 button, and to open the Boot Menu, you need to click another.

Most often it is Esc or F12. Although, as mentioned above, the call button may differ on different PCs.

Run Boot Menu on PC with mat. Asus motherboard is easy

You must press the F8 key when it boots up (at the same time that you normally enter the BIOS).

Most often this is the Esc button, although it can be F8. However, there are only 2 keys.

The boot menu on Acer is opened by pressing the F12 button

But there is one small nuance here. The fact is that usually the launch of the Boot Menu on Acer laptops is disabled. And when you press F12, nothing will happen. To make it work, you need to do the following:

Go to the "Main" tab.

The system will reboot and you can enter the boot menu on your Acer laptop using F12.

On Samsung, you need to press the Esc key. But Samsung laptop owners need to know one thing. The fact is that to call the Booth Menu you need to click the Esc button once! If you press twice, the window will simply close.

Therefore, you will have to get used to it in order to know exactly when to press the Esc key. Although there is nothing complicated here - just a couple of attempts.

HP also has its own specifics

Launching the Boot Menu on HP also has its own specifics. After all, the opening of the Booth Menu is carried out somewhat differently.

Ready.

After that, the boot menu of the HP laptop will open, and you can set the priority for turning on devices (using the arrows).

Boot menu on Windows 10 or 8

If Windows 8 or Windows 10 is installed on a PC or laptop, then you most likely will not be able to turn on the Boot Menu.

The fact is that these operating systems have a small feature - by default they have "Quick Startup" enabled, so they do not turn off completely. This is called hibernation (something like sleep mode). Therefore, when loading a PC or laptop, you will not be able to open this menu on Windows 10.

Hold Shift when turning off your laptop or PC. After that, it will turn off normally (in the usual sense of the word). And then you can run it on Windows 10 by pressing the desired key.
Instead of shutting down the PC, you can restart it. And at the moment of switching on, just press a certain key corresponding to your brand of laptop or motherboard.

For your convenience, below is a screenshot showing the keys to launch the Boot Menu for popular laptops and PCs.

For example, for computers running on the mat. MSI board is the F11 button. And launching the Boot Menu on Sony VAIO laptops is done using F12. In general, you will figure it out yourself - the table is simple and understandable.

Do you want to boot your computer from a flash drive or disk? To do this, it is not necessary to enter the BIOS settings. Especially if you don't understand much about it. After all, there is an easier way. In this case, just go to the Boot Menu and change the device boot priority. This is done in 10 seconds. And most importantly - no shamanism in the BIOS.
Boot Menu - what is it
What do users usually do to reinstall Windows? Usually written down bootable flash drive through UltraISO, and then they configure the BIOS to boot from a USB flash drive. In principle, this is not difficult, but there is a simpler option - calling the Boot Menu. What's this?

Boot Menu (or boot menu) is an extremely useful BIOS option. With it, you can quickly set the device boot priority. Simply put, launching the Boot Menu brings up a small window in which you can immediately put a USB flash drive (or DVD drive) in first place, and a hard drive in second. In this case, you do not need to enter the BIOS.

Also, changing the settings in the Boot Menu does not affect the BIOS settings. That is, this option works once - for one inclusion. And when you restart your PC, Windows will boot from your hard drive (as usual). If you again need to start installing Windows from a USB flash drive, call the Boot Menu again.

If you remember, when changing the settings in the BIOS, you had to go into it again and change the device boot priority back (that is, put the hard drive in first place). And in the case of the Boot Menu, this is not necessary.

How to open Boot Menu? It is very simple - to click one key when Windows boots. Which one? It depends on the:

BIOS version;

motherboard;

laptop models.

That is, the situation is exactly the same as with the BIOS. For example, to enable the BIOS on a laptop, you had to press the Del or F2 button, then to open the Boot Menu you need to click another.

Most often it is Esc or F12. Although, as mentioned above, on different PCs, the Boot Menu call button may differ.

Therefore, below we will look at how to launch the Boot Menu on popular brands of laptops and personal computers.
How to enable Boot Menu on Lenovo laptops
Owners of Lenovo laptops should not have any difficulties. After all, the Boot Menu on Lenovo is launched very simply - by pressing the F12 key when loading Windows.

Plus, on the body of many models there is a special button with a curved arrow. You can click it if you want to choose additional. download options.
How to open Boot Menu on Asus
Here it is immediately worth noting that there are Asus motherboards (installed on a PC) and laptops of this brand.

Launch the Boot Menu on a computer with a mat. The Asus board is as easy as shelling pears - you need to press the F8 key when it boots up (at the same time that you usually enter the BIOS).

And with Asus laptops there is a bit of confusion. It seems that the manufacturer is the same, but there are several buttons for launching the Booth Menu. After all, the launch of the Boot Menu on Asus laptops is carried out using one of two keys:
Most often this is the Esc button, although it can be F8. However, there are only 2 keys, so you will quickly figure out which one is responsible for launching the Boot Menu on your Asus laptop.
How to call the Boot Menu on Acer laptops
Boot Menu on Acer is opened by pressing the F12 button. But there is one small nuance here. The fact is that usually the launch of the Boot Menu on Acer laptops is disabled. And when you press F12, nothing will happen. To make it work, you need to do the following:

Enter the BIOS (when booting the laptop, press the F2 button).

Go to the "Main" tab.

Look for the line "F12 Boot Menu" and change the value "Disabled" (off) to "Enabled" (on).

Save the changed settings and exit the BIOS.

The system will reboot and you can access the Boot Menu on your Acer laptop using F12.
How to enable Boot Menu on Samsung laptops
To call the Boot Menu on Samsung, you must press the Esc key. But Samsung laptop owners need to know one thing. The fact is that to call the Booth Menu, you must click the Esc button once! If you press twice, the window will simply close.

Therefore, you will have to get used to it in order to know exactly when to press the Esc key. Although there is nothing complicated here - just a couple of attempts, and you will enter the Boot Menu on a Samsung laptop.
How to enter the Boot Menu on HP laptops
Launching the Boot Menu on HP also has its own specifics. After all, the opening of the Booth Menu is carried out somewhat differently. To enter the Boot Menu on an HP laptop, you need:

When you turn on Windows, immediately press the Esc key.

The launch menu will be displayed - press the F9 button.

Ready.

After that, the Boot Menu of the HP laptop will open, and you can set the priority for turning on devices (using the arrows).
How to enter the Boot Menu on Windows 10 or 8
All of the above methods allow you to run the Boot Menu on Windows 7. If Windows 8 or Windows 10 is installed on your PC or laptop, then you most likely will not be able to enable the Boot Menu.

The fact is that these operating systems have a small feature - by default they have "Quick Startup" enabled, so they do not turn off completely. This is called hibernation (something like sleep mode). Therefore, when loading a PC or laptop, opening the Boot Menu on Windows 10 will not work.

You can fix this in three ways:

Hold Shift when turning off your laptop or PC. After that, it will turn off normally (in the usual sense of the word). And then you can launch the Boot Menu on Windows 10 by pressing the desired key.

Instead of shutting down the PC, you can restart it. And at the moment of switching on, just press a certain key corresponding to your brand of laptop or motherboard.

Turn off the Quick Start feature. For this:

That's it - now you can easily enter the Boot Menu on Windows 10 or Windows 8.
List of keys to enter the Boot Menu
For your convenience, below is a screenshot showing the keys to launch the Boot Menu for popular laptops and PCs. For example, for computers running on the mat. MSI board is the F11 button. And launching the Boot Menu on Sony VAIO laptops is done using F12. In general, you will figure it out yourself - the table is simple and understandable.

Also, for convenience, buttons for entering the BIOS are written. If for some reason you cannot open the Boot Menu, you can always change the device boot priority in the standard way - through BIOS.

Good day to all.

When installing Windows (for example), it is very often necessary to select bootable media other than the hard disk. You can do this in two ways:

1) Go into the BIOS and change the boot queue (i.e. put the flash drive in front of the HDD in the boot queue - this way the PC will first check the flash drive for boot records, and only then the hard drive);

2) Call the Boot Menu and select a specific media for booting at the moment. In my opinion, this option is even better than the first one: it's faster and you don't need to go back and forth in the BIOS to change the boot queue.

To enter the BIOS (call the Boot Menu) in most cases, the keys are used: F2, Del, Esc, F12 (depending on the device manufacturer). The button must be pressed immediately after turning on the computer (you can several times so as not to miss the right moment.

By the way, if you look closely at the first screen, which is visible immediately after turning on the computer, then they often write a button on it to enter the desired settings (call the menu). Screenshot example below.

Rice. 1. Dual Bios. DEL button - enter the BIOS settings, F12 button - Call the Boot Menu.

Table number 1: keyboard shortcuts for computers

To use the table - You need to know what kind of motherboard you have, BIOS version. There are several ways to find out, here are the fastest:

Simple free program, which will tell you quite a lot about your hardware. For example, you can find out information about: processor (CPU), RAM (Ram), motherboard (Motherboard), video card (Graphics), HDD drives, SSD (Storage), etc. In addition, you can find out and control online temperature main components: hard disk, video card, processor.

A screenshot of this utility is shown in Fig. 2.

Rice. 2. Speccy - getting information about the motherboard

Table #1

Motherboard	BIOS Version	hot key	Which menu will be open
Acer		Del	Enter Setup
		F12	boot menu
ASRock	AMI	F2 or DEL	run Setup
		F6	Instant Flash
		F11	boot menu
		TAB	switch Screen
Asus	Phoenix Award	DEL	BIOS Setup
		TAB	Display BIOS POST Message
		F8	boot menu
		Alt+F2	Asus EZ Flash 2
		F4	Asus Core Unlocker
BioStar	Phoenix Award	F8	Enable System Configuration
		F9	Select Booting Device after POST
		DEL	Enter SETUP
Chaintech	Award	DEL	Enter SETUP
		ALT+F2	Enter AWDFLASH
ECS (Elite Grour)	AMI	DEL	Enter SETUP
		F11	BBS POPUP
FoxConn (WinFast)		TAB	POST Screen
		DEL	SETUP
		ESC	boot menu
gigabyte	Award	ESC	Skip memory test
		DEL	Enter SETUP/Q-Flash
		F9	Xpress Recovery Xpress Recovery 2
		F12	boot menu
Intel	AMI	F2	Enter SETUP

Table number 2: hot keys (Bios / Boot Menu, etc.) for laptops

Note: on modern laptops, the key combination in Windows also works: hold down the SHIFT button + select the restart button with the mouse.

The Boot Menu is a small window in which, using the mouse (arrows on the keyboard), you can select the device from which to boot. An example of such a menu is shown in Fig. 3.

Depending on the manufacturer of your device, the menu may be slightly different, but the principle of operation is the same everywhere.

Table number 2

Notebook manufacturer	BIOS Version	hot key	Function / menu call
Acer	Phoenix	F2	Enter Setup
		F12	Boot Menu (Change Boot Device,Multi Boot Selection Menu)
		Alt+F10	D2D Recovery (disk-to-disk system recovery)
Asus	AMI	F2	Enter Setup
		ESC	popup menu
		F4	Easy Flash
	Phoenix Award	DEL	BIOS Setup
		F8	boot menu
Benq	Phoenix	F2	BIOS Setup
Dell	Phoenix,Aptio	F2	Setup
		F12	boot menu
eMachines (Acer)	Phoenix	F12	boot menu
Fujitsu-Siemens	AMI	F2	BIOS Setup
		F12	boot menu
Gateway (Acer)	Phoenix	Click mouse or Enter	Menu
		F2	BIOS Settings
		F10	boot menu
		F12	PXE Boot
HP (Hewlett-Packard)/ Compaq	Insyde	ESC	Startup Menu
		F1	System Information
		F2	System Diagnostics
		F9	Boot Device Options
		F10	BIOS Setup
		F11	System Recovery
		Enter	Continue Startup
Next		F1	Call Boot Menu
		F2	BIOS setup
Lenovo (IBM)	Phoenix SecureCore Tiano	F2	Setup
		F12	Multi Boot Menu
MSI (MicroStar)	***	DEL	Setup
		F11	boot menu
		TAB	Show POST screen
		F3	Recovery
Packard Bell (Acer)	Phoenix	F2	Setup
		F12	boot menu
Toshiba	Phoenix	Esc,F1,F2	Enter Setup
Toshiba Satellite A300		F12	bios

Table number 3: recovery from a hidden partition (for laptops)

Most modern laptops have a dedicated hidden section with the ability to restore Windows using a "pair" of keys (no need to prepare a bootable USB flash drive, download ISO images with Windows, etc.).

As a rule, to start the recovery function, after turning on the laptop, just press one key (F9, for example, on Asus laptops). Next, a window will appear in which you need to follow the instructions of the recovery wizard.

Note: when restoring information, system disk"C:\" is often formatted and all information is removed from it. Make a copy of important data from it in advance.

Rice. 4. ACER laptop - service recovery utility

Table #3

Notebook manufacturer	Button combination	Note
Acer	Alt+F10	First you need to enter the BIOS of the laptop, and enable the D2D Recovery function. In the recovery system, by default, the password is set: 000000 or AIM1R8.
Asus	F9
Dell Inspiron	Ctrl+F11
Fujitsu-Siemens	F8
HP	F10, F11
LG	F11
Lenovo ThinkPad	F11
MSI	F3
Packard Bell	F10
RoverBook	alt
Samsung	F4
Sony VAIO	F10
Toshiba	F8, F11

The tables will be updated (over time). For additions on the topic of the article - a big merci in advance. Good luck to all!